english
    Home | Contact Us | FAQ's | About Us | HR | Foreign Trade    
        Highlights      
                     
petrilac      
polilak
penta
 
 
Line: Polilak open/close
 
XYLASOL® LASUR
Satin protector for interior woods.
enlarge picture (+)
 
pdf
 
 
XYLASOL® LASUR satin protector is elaborated with last generation resins, inorganic pigments, UV filters and best quality solvents. Protects from the sun, rain, snow, marine breeze and from sudden temperature changes.
Penetrates deeply without forming a superficial layer and, in consequence, does not crack nor peel; the wood "breathes" and avoids the formation of microorganisms. Does not hide the grains nor alters the natural aspect of the wood, enhancing its beauty with a satin finishing,
It is the easiest to apply and maintain.
 
CARACTERISTICAS DEL PRODUCTO


• Protects the wood even in extreme climates.
• Inhibits the fungus and microorganism formation.
•  It is hydro-repellent and the interior humidity is eliminated as steam. 
•  Enhances the beauty with a satin finishing.
•  Does not peel nor cracks.
•  Easy to apply and maintain.

 
PREPARACIÓN DE LA SUPERFICIE

Must be clean, dry and free from grease or old covering remainings.
New woods: sand and eliminate impurities.
Varnished woods: eliminate old coverings through removers and/or sandpaper, leaving the pores completely opened to allow the correct penetration of XYLASOL® LASUR protector satinado.

 
APLICACIÓN

Stir before use
With a brush: apply 2 or 3 coats without diluting, depending on the hardness and absorption of the wood. There must not be a layer on the surface to avoid crackings and/or peelings
Eliminate excesses through "brushing" with a brush or cloth before it dries.
Sanding is not necessary to accomplish adherence. If made, it will improve the finishing and performance of the product.

DRYING TIME:
4 hours to the tact. From 6 to 8 hours between coats. In very resinous woods incense, for example- the drying can be slower. To avoid it, rub strongly and periodically with a cloth humified in thinner.

 
MAINTENANCE:
Very simple: just clean through a brush or a soft sanding and apply one more coat.
We recommend a maintenance every 2 years according to the solar exposition of the wood.
Does not require removing or scratching before a new application, which simplifies the job remarkably. 

PERFORMANCE:
14 to 15 m² per litre and per coat according to the absorption of the wood.

CLEANING:
Clean the work tools with mineral turpentine immediately after use.

TONALITIES:
Satin: Natural, Crystal, Cedar, Light Oak, Dark Oak, Mahogany, Walnut.
Bright: Natural, Cristal, Cedar, Dark Oak, Mahogany, Walnut.

PRESENTATION:
1, 4 and 20 litres.
 
             
Uses
For Woods
For Metals
For Bricks
For Cold Floors
For Industrial Use
 
Línes
Petrilac Products
FerroBet Products
Polilak Products
Institucional
Sale Points
Aboit Us
Foreign Trade
Contact Us
HR
  PETRILAC
Business Offices:
Ciudad de La Paz 2426 (1428) Buenos Aires - Argentina.
Tel.: (011) 4788-9400 - Fax: (011) 4788-9300
Technical support: 0800-77PETRI (73874)
  certificacion